kWS2805·WS2811 V1.4j

WS2811

active

by WorldSemi

ActiveSOIC8DIP8
Datasheet

Overview

release year
2011
other links
WS2811 Pixel Protocol Overview | Advatek Lighting
price
$0.042
$0.028
$0.021

Data & Protocol

type
WS2811/12
clocked
No
channels
3
bitrate
800kHz
pixel size bits
24
backup line
No
pixel rate max
33.3 kpx/s

Color & Brightness

channel bits
8
aggregate bits
24
pwm frequency
2.0kHz
pwm frequency notes
400Hz was old spec. Newer WS2811 chips have 2kHz PWM like WS2812B post-2018

Electrical

output voltage
12V
output voltage notes
Vds max - can drive LEDs at various voltages up to 12V via constant current
supply voltage
5V
supply voltage notes
VCC range 4.5-5.5V
gpio
min
3.0V
max
5V
notes
0.6*VDD at 5V supply
max current
19mA
max current notes
Constant current driver, actual current set by external resistor
current programmable
Yes
current range
3-60mA typical depending on Rext
quiescent current
0.7mA

Datasheet

Physical

package sizes
SOIC8DIP8
package size
SOIC8/DIP8
pin count
8

Related Products

Related
APA106
Variants
WS2811 V1.4

Used by Drive Libraries

Arduino Ethernet Nano with ENC28J60Artnet ReceiveArtnetWiFiESPixelstickMobaLedLibNeoPixelOctoWS2811Orange PI DMXTriantaduoWS2811WLED

Notes

Addressable in groups (usually of 3 LEDs), common on 3 wire pixels, pucks, floods

Technical Notes

  • Standalone IC, not integrated with LEDs like WS2812
  • Commonly used for 12V pixels with 3 LEDs in series
  • External resistor sets output current
  • PWM updated from 400Hz to 2kHz in newer silicon revisions
  • Widely cloned - many compatible ICs available